-
Khuyến mãi Cisco Webex Room Kit & Kit Plus P60 tháng 11/2019
Tặng TV LG 43" khi mua thiết bị hội nghị truyền hình Cisco Webex Room Kit và Room Kit Plus P60 -
Khuyến mãi Cisco Webex Room Kit Mini tháng 11/2019
Nhận ngay voucher mua hàng COOP Mart 2.000.000đ khi mua Cisco Webex Room Kit Mini -
Khuyến mãi Cisco Webex Room Kit Plus tháng 09/2019
Mua thiết bị họp trực tuyến Cisco Webex Room Kit Plus. Nhận ngay màn hình LG 49" 4K. -
Khuyến mãi Cisco Webex Room Kit tháng 09/2019
Tặng ngay máy lọc không khí F-PXM35-S khi mua thiết bị hội nghị truyền hình Cisco Webex Room Kit
Thiết bị hội nghị truyền hình cá nhân Cisco DX70
Thiết bị hội nghị truyền hình cá nhân CISCO DX70 All-in-One Desktop Collaboration
CISCO DX70 All-in-One Desktop Collaboration là gì
Thiết bị hội nghị truyền hình cá nhân Cisco DX70 là bộ thiết bị họp trực tuyến giành cho cá nhân đặc biệt là giành cho các lãnh đạo cấp cao của doanh nghiệp cũng như cơ quan hành chính. Với kích thước gọn gàng, đặt vừa vặn trên bàn làm việc DX70 có thể đáp ứng nhanh nhu cầu kết nối giữa lãnh đạo với các phòng ban khác hoặc tham gia vào các cuộc họp trực tuyến của đơn vị mà không cần phải di chuyển đến phòng họp.
Hội nghị truyền hình cá nhân Cisco DX70 có thể đồng bộ hóa với hệ thống phòng họp trực tuyến được thiết lập với nhiều dạng thiết bị như thiết bị hội nghị truyền hình phòng họp SX (với các dòng SX10; SX20; SX80) ; thiết bị hội nghị tích họp MX (MX200 G2; MX300 G2; MX700 ; MX800 single; MX800 Dual).
Cấu hình tiêu chuẩn của CISCO DX70 All-in-One Desktop Collaboration
DX70 được tích hợp tất cả các các linh kiện của bundle hội nghị vào trong 1 thiết bị duy nhất (All in One Desktop). Vì vậy để khởi động và sử dụng DX70 người dùng chỉ đơn giản là bật thiết bị lên sau đó chọn đầu cầu cần kết nối là đã có thể tham dự họp ngay lập tức. Cụ thế các thông số của thiết bị ngoại vi được tích hợp vào DX70 gồm:
- Màn hình hiển thị: màn hình 14 inch, tỷ lệ 16:9 với độ phân giải Full HD (1080p)
- Camera: chuẩn H.264 AVC
- OS: Android Kitka Enhanced Security (SE) 4.1.1
- CPU: TI OMAP 4470 1.5 GHz
- Memory: 2GB Ram
- Storage: 8 GB eMMC flash memory
Ưu điểm nổi bật của Cisco DX70
- Nhanh chóng lắp đặt;
- Phù họp với phòng làm việc cá nhân của lãnh đạo cấp cao;
- Thiết kế thanh lịch hiện đại hài hoài với mọi không gian đặt máy;
- Chất lượng hình ảnh cuộc họp từ HD trở lên;
- Có thể kết nối nhiều đầu cầu cùng một lúc ( cần kết nối thêm BE6K hoặc MCU 5300)
Một số hình ảnh về Cisco DX70
Thông số kỹ thuật Cisco DX70
Feature |
Benefit |
Components |
Fully integrated unit including: ● Codec
● Camera
● Display
● Microphones and speaker
Included: Screen cleaning cloth, Ethernet cable (2.9m), and power supply |
Display |
● 14-inch LCD monitor
● Resolution: 1920 x 1080 (16:9)
● AHVA display technology
● Contrast ratio: 700:1 (typical)
● Viewing cone: 89/89/89/89
● Response time: 25 ms
● Brightness: 300 cd/m2 (5 points average)
● 10-point multitouch surface with capacitive sensing
|
Supported PC input resolutions |
Up to 1080p |
Ergonomic design |
● The foot stand is retractable for easy transportation.
● You can easily tilt the unit from an angle of 5° to 70° from the vertical.
● You can tilt the camera from an angle of –5° to 70° from the display.
● The main I/O panel includes a flip cover to obscure connections.
|
Audio |
● Audio system playback: Frequency range: 100 Hz to 15 kHz, +/–3 dB*
● Audio system playback: Maximum level: 90 dB at 1w/1m*
● Optimally tuned and located analog omnidirectional microphone
* Specification based on direct measurement of the acoustic sub-system |
Front camera |
● 63° horizontal field of view
● 38° vertical field of view
● Resolution: 1080p30
● F 2.2
● Instant focus based on face detection
● Privacy shutter
|
Operating system |
Android OS 4.1.1 |
Processor |
TI OMAP 4470 1.5-GHz dual-core ARM Cortex-A9 processor |
Storage |
8-GB eMMC NAND flash memory (embedded multimedia card; nonvolatile) |
Memory |
2-GB RAM; Low Power Double Data Rate Synchronous Dynamic Random-Access Memory (LPDDR2 SDRAM) |
Ports and slots |
● High-Definition Multimedia Interface (HDMI) type A port for PC or Mac video input
● HDMI type A port output (supports mirror-mode output; cannot be used simultaneously with the HDMI input)
● High-speed USB 2.0 ports:
◦ Three standard type A ports (for keyboard, mouse, headset, external camera, thumb drive, and memory stick connectivity)
◦ Side-mounted USB port that provides high-current (2A) charging; the two rear-mounted ports each provide 500 mA charging
◦ One Micro-B USB port (serial port for diagnostic and service use)
● Micro Secure Digital Standard Capacity (HDSC) slot for nonvolatile storage of applications or file expansion up to 32 GB (standard-definition [SD] card speed Class 4 or later recommended)
● One 3.5-mm analog headphone and headset jack
|
Physical buttons |
● Cap-sense “Source” button to swap between HDMI input and the DX70 interface; button is lit when HDMI input is connected
● Cap-sense Audio Volume up/down
● Cap-sense Audio Mute
● Power/Reset/Sleep button
|
Visual indicator |
● Camera LED indicator (incoming calls and camera activation)
● Microphone LED indicator (mute)
● Power button LED indicator (power on, sleeping, message waiting, and error)
● “Source” button (lights when HDMI IN source is present)
|
Physical dimensions (H x W x D) |
14.84 x 13.91 x 2.45 in. (377.1 x 353.1 x 62.3 mm) |
Weight |
7.5 lb (3.4 kg) |
Power |
Rated: 3.5A at 12V maximum Low-power standby mode Integrated Cisco EnergyWise® support |
Physical security |
Kensington Security Lock Slot |
Connectivity |
|
Ethernet |
● An internal 2-port Cisco Ethernet switch allows for a direct connection to a 10/100/1000BASE-T Ethernet network (IEEE802.3i/802.3u/802.3ab) through an RJ-45 interface with single LAN connectivity for both the phone and a co-located PC or Mac.
● The system administrator can designate separate VLANs (IEEE 802.1Q) for the PC and phone, providing improved security and reliability of voice and data traffic.
|
Desktop Wi-Fi Ethernet |
● As an alternative to wired Ethernet, the DX70 supports connection to the network with 802.11a/b/g/n Wi-Fi.
|
Network features |
● Cisco Discovery Protocol
● Cisco Peer-to-Peer Distribution Protocol (PPDP)
● Session Initiation Protocol (SIP) for signaling
● Session Description Protocol (SDP)
● User Datagram Protocol (UDP) (used only for Real-Time Transport Protocol [RTP] streams)
● Dynamic Host Configuration Protocol (DHCP) client or static configuration
● Transparent secure roaming
● Gratuitous Address Resolution Protocol (GARP)
● Switch auto-negotiation
● Domain Name System (DNS)
● Web proxy (configured manually or by auto-configuration Protected Access Credential [PAC] files)
● NT LAN Manager (NTLM) and Kerberos authentication
● Trivial File Transfer Protocol (TFTP)
● Secure Hypertext Transfer Protocol (HTTPS)
● Wi-Fi management
● IPv4 configuration
● IPv6 configuration
● VLAN
● Real-Time Control Protocol (RTCP) (provides quality-of-service [QoS] data [such as jitter, latency, and round-trip delay] on RTP streams in order to provide a better video experience)
● Secure Real-Time Transport Protocol (SRTP)
● Software port speed (manual or auto-configuration, including disablement)
● PC port speed (manual or auto-configuration, including disablement)
|
Bluetooth |
Bluetooth 3.0 Enhanced Data Rate (EDR) Class 2 technology (up to 30-ft [10m] range) ● Human Interface Device (HID) keyboard and mouse support for adding additional input accessories
● Hands-Free Profile (HFP) for untethered headset connections and voice communications
● Phone Book Access Profile (PBAP), which enables the exchange of phone-book objects between devices
● Advanced Audio Distribution Profile (A2DP) for streaming audio
● Object Push Profile (OPP) for generic file exchange
|
Accessories |
|
Cisco VESA mounting kit |
This optional mounting kit includes an adapter that replaces the DX70 foot stand and provides mounting points in the two VESA standards (75 x 75 mm and 100 x 100 mm), allowing the use of third-party mounting solutions or the basic flush wall-mount included with the kit. |
Firmware |
|
Version |
10.2.5 firmware |
Call platform support; provisioning and management |
● Minimum supported: Cisco UCM Versions 8.5(1), 8.6(1), and 8.6(2)
● Recommended: Cisco UCM Versions 9.1.2, 10.5(1), and later
● Minimum supported Cisco UCM for Cisco Expressway: 9.1(2) SU1
● Minimum supported Cisco Expressway: X8.5.0
● Cisco Hosted Collaboration Solution (HCS)
● Cisco Business Edition 6000 Version 9.1 or later
|
Upgrading process |
● Software upgrade of the device through Cisco UCM
● Support for online firmware upgrades using TFTP
● HTTP firmware management
|
Temperature Range |
|
Operating temperature |
● 32 to 104°F (0 to 40°C)
|
Relative humidity |
● 10 to 90% (noncondensing)
|
Storage temperature |
● –4 to 140°F (–20 to 60°C)
|
Approvals and Compliance |
|
|
● Directive 2006/95/EC (Low-Voltage Directive) - Standard EN 60950-1
● Directive 2004/108/EC (EMC Directive) - Standard EN 55022, Class B - Standard EN 55024 - Standard EN 61000-3-2/-3-3
● Compliance with ETSI EN 301 489, ETSI EN 300 328, and ETSI EN 301 893
● Directive 2011/65/EU (RoHS), Directive 2009/125/EC (ErP), and Directive 2002/96/EC (WEEE)
● Approved according to UL 60950-1 and CNA/CSA C22.2 No. 60950-1-07
● Compliance with FCC CFR 47 Part 15 Class B
● Compliance with CFR 47 Part 15.247, CFR 47 Part 15.407, and 47 CFR Part 2.1093 FCC applicable KDBs
|